Head Office & MFG
Vancouver, BC, Canada
(604) 451-1080
Branch Office & MFG
Toronto, ON, Canada
toll free: 1-888-520-9009
Branch Office
Los Angeles, CA, USA|
toll free: 1-888-520-9009

Ordering
Please order material by catalogue number, specifying length required and number of pieces. Most weatherseals and thresholds are stocked in standard sizes and most are available in lengths up to 15 ft. Thresholds are cut with 1/2" to 1" extra for trimming to size. For exact size, order threshold or weatherseal to specified length followed by "NET". Weatherseals and thresholds ordered under 36" (914mm) will be charged as 36" (914mm). Products ordered over 9 ft. (2743mm) but under 12 ft. (3658mm) will be charged as 12 ft. (3658mm). Product ordered over 144" (3657mm) will be charged as 180" (4572mm).

Please refer to DraftSeal full line price list for all product numbers, finishes, lineals, lengths & coil lengths.

Materials, Finishes & Fabrication
Aluminum All aluminum extrusions are alloy 6063T5 & are furnished in mill finish. Some are available in clear anodized, bronze anodized, gold anodized & bright dip gold anodized finishes.

Vinyl Inserts (flexible)
All cold temperature vinyl (p.v.c.) inserts are extruded from pure vinyl raw material.

Synprene (flexible)
Some inserts are available in thermal plastic elastomer material (TPE). This Synprene (TPE) material has low temperature flexibility (remains flexible down to -80° Fahrenheit (-62° Celsius). It has excellent U.V. stability & resistance to compression set. It is designed for applications requiring non flammability. It also has good chemical resistance to alcohols, acids & bases.

Neoprene (Neoprene spec applies to certain products on pages 22, 23, 28, 29, 30 & 34 of the DS Catalogue)
Synthetic rubber polymer blend: Polychloroprene and EPDM, very good abrasion resistance, tensile strength and memory, flame and moisture resistant. Temperature range -30° to 250° Fahrenheit (-34° to 121° Celsius). Good resistance to ozone, sunlight and aging; BHMA Certified to ANSI/BHMA A156.22 performance tests for Heat, Cold, Air Infiltration and Smoke Infiltration.

Silicone (Silicone spec applies to certain products on pages 23 & 30 of the DS Catalogue)
Synthetic rubber polymer: Polysiloxane. Excellent flexibility and memory, flame and moisture resistant. Temperature range -100°F to 500°F, remains flexible at extreme temperatures. Excellent resistance to ozone, UV and aging. Recommended for areas using FM200 or Halon Fire Suppression Systems. BHMA Certified to ANSI/BHMA A156.22 performance tests for Heat, Cold, Air Infiltration and Smoke Infiltration.

Vinyl (rigid)
All PVC rigid profiles are extruded from PVC raw materials & are available in Solid Brown (B), White (W), Grey (G), Black (BL) & Sandstone (S) as indicated. Some profiles are extruded as Dual Durometer (flexible & rigid PVC fused together).

Screws
All thresholds are punched & countersunk for #10 Robertson flat head wood screws. Plated screws & plastic anchors of appropriate length are furnished with all aluminum & oak thresholds free of charge. All aluminum weatherseals are punched with slotted holes for #6 quad truss head self drilling screw. Plated screws of appropriate length are furnished with all weatherseals free of charge. Antique bronze-plated screws of appropriate length are furnished with all bronze anodized weatherseals & thresholds free of charge. Yellow zinc screws supplied with gold anodized & bright dip gold products.

Custom Fabrication
Charges will apply for any ripping of thresholds, special fabrication, custom drilling or punch pattern.

PLEASE NOTE: Changes & updates to the DS Catalogue may occur without notice. This may include, but not limited to, specifications, product availability & product materials. A.K. Draft Seal Ltd. will not be held liable for any changes to this catalogue. A.K. Draft Seal Ltd. will not be liable for defects or damages arising from improper installation, product modification, incorrect application or storage of product. Written notice of damages must occur within the warranty period. Liability shall be limited to the replacement of product or component determined to be defective and shall not include costs arising from removal or reinstallation of product. Cost of replacement shall not exceed original purchase price. No other claims will be allowed. In no event shall liability be extended to include punitive, incidental or consequential damages arising from use of A.K. Draft Seal Ltd. products. This is the sole warranty given by A.K. Draft Seal Ltd. No other warranty implied or expressed shall be allowed.

back to top